How To Stop VIZIO TV From Turning On By Itself?(9 Ways)

While a VIZIO smart TV is great to have in your home, there are times when issues can occur. A common issue is that the TV will start to turn on by itself. Consumers may wonder what they can do to make this stop. 

How to stop your Vizio TV from turning on by itself? Switch your TV from Eco Solution to QuickStart.Go to the Settings tab on the home screen>select System>Power Mode>change the setting to QuickStart. Disable the HDMI CEC on the TV.Press the Menu button>select System or Settings>select CEC>press OK on CEC and select Off.

These methods will help take care of the TV and get it to stop turning on all the time. Let’s take a closer look at how these can work so your TV will only turn on when you want it to. Check out the list of the Best Streaming Devices on Amazon now!

How to Stop VIZIO TV From Turning On By Itself?

Having your VIZIO TV turn on all the time without your help can be frustrating and annoying. There are a few steps that you can take to help stop this from happening and to keep the TV off once you turn it off. 

Some of the different steps that you can use to stop the VIZIO TV from turning on include:

1. Check The Power Button

It may seem like a silly thing to do, but take a moment to check the power button on your remote. It is possible that it got stuck. 

Sometimes a button can be stuck, even when it looks normal. The best way to fix this issue is to take the remote apart and clean it all out. 

Take your time when you clean out the remote. Make sure that all of the specks of dust are gone, and there is nothing left in the remote at all. This can help clear it out, and it may be the simple fix that you need when using the remote. 

Another tip I used before was to press all the buttons on your remote a few times. Pres one button 2-3 time, then move on the the next one, repeating this for all the buttons on the remote. This is very effective for making sure no button accidentally got stuck.

2. Check The Batteries In The Remote

After taking the remote apart, pressing all the buttons and cleaning it out, the next step is to check the batteries. 

This solution may seem a little bit counterintuitive, but it can work. Sometimes, when the batteries are low on power, they will send random signals to the TV. These signals could include turning the TV on by itself. 

If you have had trouble getting the remote to respond to you, usually when having to press a button on the remote more than once, you should try to replace the batteries to see how that works. 

3. Check for Interference

Many Vizio remotes nowadays are universal, meaning they can work with multiple Vizio TVs. If you have a few TVs in the house, make sure that you are accidentally not using any other remote to tower your Vizio TV on by mistake.

4. Disconnect from Wifi

Let’s elaborate on the signal interference further. Now that we have checked the remote, let’s see if the problem stops if you disconnect your TV from WiFi altogether. If the problem stops, it mean’s that it was one of your connected devices causing this issue. We talk about it in more detail in our next step.

5. Check The Connected Devices

Another issue that you may have is that the streaming device is malfunctioning and causing the TV to turn on by itself. A Roku player or Fire TV Stick are common culprits in this matter.

If you have tried some of the other options and they did not seem to work, then check the streaming devices. Unplug them one by one for a few days and see whether or not the problem persists. 

If it continues even without these devices plugged in, then they were not the problem.  It is possible that there is damage to the device’s input or cord. When this happens, you need to get them replaced. 

VIZIO TVs use CEC to exchange commands with other devices connected via HDMI. It’s possible that your cable box or Xbox is sending a ‘Power On’ signal to your TV.

You can disable the HDMI CEC on the TV for a bit to help eliminate that as a possibility. Follow these steps:

1. Press the Menu button.
2. Select System or Settings.
3. Select CEC.
4. Press OK on CEC and select Off.

It is also possible that the USB hard drive connected to the TV might be the cause of the problem. Try removing all the unnecessary devices from your TV and see if it works better.

6. Switch to QuickStart

The system settings on your VIZIO TV could be part of the blame. If nothing seems to work, then working through the system settings may be something that would. 

To work through the VIZIO TV settings:

1. Go to the Settings tab on the home screen. 
2. Scroll down until you see System and click on that. 
3. Click on Power Mode.
4. If you see that the power mode is on Eco Mode, then you need to change it to QuickStart. 

Give the TV a few days to see whether it turns on by itself again or stays off until you push the power button. This is often a good fix, but if it doesn’t work, it may be time to reset the VIZIO TV. 

7. Check the Settings

Smart TVs have a lot of useful functions that are meant to make our lives easier, one of them being the Timer Setting. If you want your TV to turn on at any given time, that’s where you need to go. Check if you don’t have this setting on by mistake.

8. Check For Updates

Sometimes it’s possible that your TV is running an outdated version of hardware, which might cause it to malfunction. To rule it out, follow the steps:

1. Press the V key on the TV remote.
2. Select System from the menu.
3. Select Check for Updates.
4. The TV will start checking for updates.
5. If a new update is available, confirm you want to install it and wait for the process to complete.

9. Resetting The TV

When all of the other options have failed to get the TV to stop turning on by itself, it is time to reset the whole thing and see how that helps. 

Many consumers are a bit apprehensive about doing a factory reset on their smart TV, but there are situations where this is the best course of action to get it to work. Factory resets should be the last resort, but they are efficient at getting the problem fixed on your TV. 

To reset your VIZIO TV, there are a few steps to use, including:

1. Grab the remote and click on Menu. 
2. Make your way to the settings and then find System before clicking OK. 
3. Choose the option to “Reset TV to Factory Defaults.”
4. If you set up a parental code before, you will be able to type that in here. 
5. If you did not put in a parental code, then you will need to punch in 0 0 0 0 when it asks you for the password. 
6. Click on Reset and hit OK.
7. Your TV is going to turn off and work on the reset. Do not mess with anything during this time.

When the reset process is done, you will go through all the steps for the setup again. All of your previous data and settings will be gone from the TV, so you will need to put these all back in again. Check out the list of the Best Streaming Devices on Amazon now!

Conclusion

Hopefully, after finishing all these steps, you will have your TV stop turning on by itself. When the VIZIO TV starts by itself, it is usually as simple as changing out the batteries or cleaning the remote out. By trying the methods above, you can get the TV to stop turning on, so you do not need to worry about it.