Do you have a blinking green light on your Verizon router and wonder what it means?
In this blog post, we’ll show you what this indicates on your router, and how to fix it in case things get out of control. Keep reading for step-by-step instructions.
What Does Blinking Green Light Mean on Verizon Router?
The blinking green light on your Verizon router means that it is sending or receiving data.
In case the green light is solid, it indicates that you have a connection but no traffic is being passed.
This is perfectly normal and nothing to be concerned about.
If, however, the light is blinking red or orange, then this indicates that there is a problem with your connection, and you should take certain troubleshooting steps to get back online.
Why Is Your Verizon Router Blinking Green?
There are a few reasons why your Verizon router may have a blinking green light.
The most common one is that it is simply sending or receiving data. If you notice that the light is constantly blinking, this means that there is a lot of traffic going in and out of your network.
This is perfectly normal if you are downloading a lot of data or if there are multiple devices connected to your network.
Another reason why the light may be blinking is that there is a problem with your connection.
As mentioned earlier, a blinking green light on your router isn’t a reason to worry, the router is just doing its thing.
But if you noticed any negative changes in your Wi-Fi connection or speed, we will give you a few easy troubleshooting steps to speed things up for you.
How to Fix Blinking Green Light on Verizon Router?
Just to make things clear, a green blinking light is okay, and you don’t need to specifically tackle this.
We will assume that a better connection and loading time is what you are after.
Here are some of the things that will help and your congested router with the blinking green light.
1. Reboot The Router
First, try restarting the device. I highly recommend to start with this method because there is a chance you won’t need to do anything else to get your router up to speed.
To reboot your Verizon router:
- Turn off the router by unplugging it from the power source.
- Wait for about 30 seconds.
- Plug the router back into the power source.
- Wait for the router to boot up.
The solid white light will indicate that there is a connection and everything is working correctly.
2. Power Cycle The Router
This method is similar to a regular router rebooting, yet it will also help get rid of any residual electricity stored in the router.
The router will cold boot itself when you power it back on, and work much better.
- Turn off your router by pressing its power button.
- Wait for 10 seconds.
- Unplug the power cable from the wall outlet.
- Wait for 10 seconds.
- Unplug the other end of the power cable from the router.
- Wait for 3-5 minutes.
- Plug the power cable back into the router first.
- Plug the other side of the power cable into the wall outlet.
After all the steps are complete, turn on your router, and give it a few minutes to establish a proper connection.
3. Check The Power Supply
If that doesn’t work, check to make sure that the power supply is plugged in and working properly.
Your router might not be getting enough power, which is causing it to load slowly and show constant green light blinking.
Try using a different wall outlet. If you are using a surge protector, plug your router into the wall outlet instead.
4. Check For Overheating
Overheating can cause all sorts of problems for your router, including a constant green light.
If you suspect that is the case, simply unplug your router from the power source, and wait for about 5 minutes for it to cool down.
Then turn it back on and see if the issue persists.
To prevent overheating:
- Make sure there is no dust and dirt on the router or around it.
- Do not place anything on top of the router.
- Make sure there is adequate ventilation around the router.
- Do not put the router in a closed cabinet or enclosed space.
- Keep the router away from heat sources like radiators, stoves, and microwaves.
If there is no issue with the overheating, the next step is to check the router’s firmware.
5. Disconnect/Reconnect The Cables
Sometimes the cables plugged into your router can come loose or get dirty or dusty.
This will prevent the router from booting and transmitting the signal properly.
To check the cables:
- Disconnect all cables, check if they are damaged or dirty.
- Blow inside the ports of the router to get rid of any dust.
- Clean or replace the cables if necessary.
- Place them back in gently, then turn on your router and see if the connection is back.
If you have a spare Ethernet, Coaxial or power cable at home, you can try swapping them and see if that helps get rid of the red globe issue.
You can even try borrowing it from a friend or a neighbor to test the theory out.
6. Check For Software Updates
If you’re still not happy with your router’s performance, the next step is to check the router’s firmware.
It is possible that the firmware update didn’t get installed correctly.
To check for the software updates on your Verizon router:
- Log in to the router’s Admin Web GUI.
- Click System Settings.
- Click Check for Software Update.
- If there’s a new firmware version available, download and install it.
Once the firmware is up-to-date, restart your router and check to see if the router is working the way it should.
As you can see, the green light on your Verizon router simply indicates that your router is sending and receiving the signal. There is nothing that needs to be done here.
But if you are worried about your router’s performance, or the router is blinking non-stop even when you aren’t downloading anything, there is a reason for concern.
We suggest you reboot your router to fix that.
To do this, unplug the power cord from the back of the router and wait 30 seconds. Plug it back in and let it boot up for a few minutes.
Once it’s fully booted, try connecting again. If you still have problems, call Verizon customer service or your local Internet provider for help. You might just need to upgrade your Internet package to something that will better suit your needs.
Hi there, technology lovers! My name is James, I am an admin and a frequent writer for this blog. I am a techno-geek, so this blog is the place where I want to share all my knowledge with you to make your life a little bit easier in terms of dealing with technology.