How To Make Your Spectrum WiFi Faster?(8 Best Practices)

The importance of a strong, high-speed WiFi connection is invaluable in a world that grows ever more reliant on the Internet. That’s why a commonly asked question among Internet users is how to make WiFi run faster. Specifically, many Internet users want to know how to make Spectrum WiFi faster. 

You can improve your Spectrum WiFi speed by doing regular equipment maintenance, choosing a channel width correctly, avoiding dead spots, and removing interference.  

Why Is Your Spectrum WiFi So Slow?

There are a lot of reasons that Spectrum wireless Internet may be running slowly. Sometimes, it’s the Spectrum equipment that is causing problems. 

Your router may be placed in a non-ideal location in your home or workspace (or you yourself might be in a bad location). Or perhaps the router needs to be restarted or rebooted to get it running smoothly again. 

You could also be facing issues with slow Internet due to the device you’re trying to go online with. For example, your mobile phone, tablet, or laptop could be backed up with viruses and data, which are interfering with WiFi speed.

And of course, you need to be using the correct GHz if you want Spectrum WiFi speed to be optimized. 

How to Make Your Spectrum WiFi Faster?

The good news is that you can easily ameliorate these problems with some quick fixes at home. There’s no need to request a repair worker to come to your home and fix the Internet.

Take a look at some of our suggested solutions below. 

1. Regular Spectrum Equipment Maintenance

Taking care of your Spectrum equipment will allow it to run properly long-term. This includes regularly restarting and/or rebooting your equipment.

You can restart your Spectrum equipment by heading to their website, signing in, and selecting your personal equipment to restart. 

When it comes to rebooting your Spectrum equipment, though, you’ll need to fully unplug it or remove its batteries. Then, wait for at least 60 seconds before you reconnect its power source.

After a few minutes of rebooting, your Internet should be refreshed and running a bit faster than before. 

Another important aspect of (one-time) maintenance is knowing where to place your Spectrum equipment. You should make sure to place your equipment in an ideal location within your home so that WiFi is always within range of your devices. 

You can figure out the best spot by visiting the areas of your home where you most often connect to WiFi. Once you’re in those spots, check to see how fast the WiFi is running.

If it’s slow, you may consider moving your equipment to a location closer to those spots. 

2. Choose the Right Channel Width

Spectrum routers will auto-default to the most optimal channel width. But if you live very close to your neighbours (like in an apartment complex), your WiFi might slow down on this channel due to interference.

This is why you should search to find the fastest channel width depending on your environment.

3. Choose the Right GHz

You also want to choose the correct GHz for Spectrum WiFi, which happens to be 5GHz. Spectrum routers typically broadcast both 5GHz or 2.4GHz simultaneously, so you’ll have to sign in to your router to turn off the 2.4GHz.

4. Eliminate Signal Blockers

The objects and walls that surround your Spectrum equipment can turn into interference that slows down your WiFi speed. This is why Spectrum recommends that its customers place equipment in open locations. Always make sure that doors are open to the room where your equipment is placed. 

You also want to avoid putting a router behind a thick wall, within a cabinet or shelf, or close to the floor or windows.

All of these placements can lead to signal blockages, which will slow down the Internet connection. 

The best locations are somewhere in the middle of your home or as close as possible to the room(s) where you most often use WiFi. For example, if you work from home and have a home office, it might be ideal to just place your equipment in that room.

But if you primarily want WiFi for your personal devices, you might place your equipment in a living room. 

There are a few key ways to strengthen your Spectrum WiFi, too. 

4. Reduce the Number of Users

One thing that strengthens WiFi is reducing the number of users connected to your Spectrum network at once. This may involve disconnecting inactive devices from the network temporarily.

Chances are, you don’t need your tablet, iPhone, and laptop connected to WiFi all at the same time. 

Once you clear up this mess, the device you’re currently using WiFi on should have a stronger connection. 

6. Close Out Inactive Tabs and Streams

Streaming – whether it’s movies, music, or TV – can become a big interference when it comes to WiFi. If you have gaming apps or music streaming apps open in the background on your mobile phone, for example, you should swipe them away.

This allows you to free up data and space so that you can connect to WiFi on your browser more easily. 

The same goes for your laptop. If you have 15 tabs open on Google Chrome, your Internet connection is going to seriously suffer. 

7. Clean Your Devices (Device Maintenance)

Finally, you can strengthen your WiFi network by making sure that your personal devices are free of viruses, malware, and adware. These things can plague your laptop or computer and lead to extremely slow or even crashing Internet browsers.

This is why you should regularly scan your device for these issues so that you can prevent them before it’s too late.

Make sure to also reset your devices from time to time to get rid of any unnecessary cache.

  • For a TV, you can unplug it from the power source for 1 minute, and then reconnect it.
  • For a smartphone, simply power it off and then back on.
  • For a laptop, press and hold the Power button for about 10-30 seconds, then turn the laptop back on.
  • For a PC, go to Settings and click the Restart button.

If that doesn’t help, you can factory reset any device you need by going to Settings and clicking the Factory reset option. This will delete all the stored files on the device and wipe it clean.

8. Contact Spectrum

Here is one more useful tip for you in the end. You can simply contact Spectrum and inform them about your problem. They will be able to walk you through it.

There might just be a case of them doing some works on the line, which can cause the Internet to be slow. There might be some error to the network affecting all the users. They will inform you if anything is wrong and when it will be sorted.

They can also reset your equipment on their end, which can speed things up for you.

You can also discuss your current Internet package with them. Your Internet being slow might be caused by your package not being properly suited to your needs.

In Conclusion

Spectrum WiFi can sometimes slow down, causing interruptions for those who rely on wireless Internet connections. But there are plenty of ways to restore your WiFi so that it is faster and stronger. 

Try out our tips, including regular device and equipment maintenance, correct equipment placement, eliminating signal blockers, and more. They’re simple and effective ways to improve the Internet at home.