10 Ways To Fix The PS4 Controller That Won’t Stop Vibrating

There can be nothing more frustrating when your PS4 gaming session is suddenly interrupted. One moment everything was fine, but the next thing you notice is that your controller just keeps vibrating when it shouldn’t.

In order to fix the vibration, start with resetting both your PS4 controller and the console. Use a USB cable to connect your controller. Disconnect and reconnect the controller, making sure that it has fresh batteries and no button on it got stuck. Factory reset your PS4 if nothing works.

If you’re not sure what’s causing the problem, here are a few troubleshooting tips that might help.

Why Won’t the PS4 Controller Stop Vibrating?

There are a few things that could be causing your PS4 controller to vibrate continuously.

There could be a problem with the pairing of the controller or with its hardware, such as a loose connection or a damaged rumble motor . Alternatively, it could be an issue with the software, such as a glitch or corrupted data.

In some rare cases, the problem may be caused by interference from another device, such as a Bluetooth speaker or wireless headset.

If you think this might be the case, try moving the other device away from your PS4 console and see if the problem goes away.

If you’re not sure what’s causing the problem, here are a few troubleshooting tips that might help.

What to Do When the PS4 Controller Won’t Stop Vibrating?

If you’re not sure what’s causing the problem, here are a few troubleshooting tips that might help:

1. Restart Your PS4 Controller

One of the first things you should try is restarting your controller. To do this, hold down the PS button on the front of the controller for about 10 seconds.

This will turn off the controller and hopefully fix any software glitches that might be causing the problem. Turn it back on by pressing the button in the middle for a few seconds.

If that didn’t help, let’s go ahead and use a dedicated Reset button at the back of your controller:

  1. Turn off the console and unplug your controller first. 
  2. Locate the small reset button on the back of the controller near the L2 shoulder button.
  3. Use a paperclip to push the button inside the hole.
  4. Hold the button down for about 5 seconds.
  5. Connect the controller to the PS4 using a USB cable.
  6. Turn on the PS4 and wait for it to boot up.

When the controller’s light turns solid, you can remove the cable and use the controller wirelessly.

2. Disconnect/Reconnect the Controller to The Console

It is possible that some kind of pairing issue has occurred and caused your controller to act out. To rule out this possibility, follow the steps below.

Here is how to disconnect your controller from the PS4:

  1. On your PS4, go to Settings.
  2. Go to Devices.
  3. Click Bluetooth devices.
  4. The controller you are using now will have a green circle next to it.
  5. Click on it and press Forget Device.
  6. Power down your PS4.

In order to power down your PS4, press and hold the PS4’s power button for about 7 seconds until you hear two beeps. The console will power off completely.

You can also power down your PS4 by holding down the PS4 button on the controller, navigating to Power in the menu and choosing Turn off PS4.

Now let’s go ahead and reconnect your PS4 controller:

  1. Connect your controller to the PS4 using a USB cable.
  2. Turn your console on and let it boot up.
  3. Press and hold the pairing button in the middle for a few seconds.
  4. Once you see the light flashing and then going solid, your controller is paired.

This should do the trick and help you stop the vibration.

3. Reset the Controller’s Settings

If restarting the controller doesn’t work, you might need to reset its settings. To do this, go to Settings on your PS4 console and select Devices.

Then, select Controllers and click the Reset button. This will reset your controller’s button mapping and hopefully fix any software glitches.

4. Check for Controller Updates

If you’re using an older model of the PS4 controller, there’s a chance that it might not be compatible with the latest version of the PS4 system software.

In this case, you might need to update the controller firmware. You can do this by going to Settings > Devices > Controllers and checking for updates.

If an update is available, follow the on-screen instructions to install it.

You can also check if a specific game requires an update by going to the Library and choosing the game you were playing when the issue occurred.

5. Replace The Controller’s Battery

If the problem is with the hardware, it could also be caused by a loose connection or a bad battery.

If the battery is starting to wear out, it can cause all sorts of problems, including making the controller vibrate.

To check the battery, remove it from the controller and try charging it using a battery charger.

If it doesn’t charge, the battery is probably bad and needs to be replaced. You can buy a replacement battery from most electronics stores or online retailers.

6. Inspect your Controller

If your PS4 controller is still vibrating non-stop, there are a few things you can do.

First, check the batteries as previously discussed to make sure they’re inserted correctly and that they’re not dead. If it’s not the batteries, try cleaning the controller’s contacts with a Q-tip and some rubbing alcohol.

Try pressing and twisting all the buttons on your controller to make sure none of them got stuck.

You can even twist the body of the controller carefully, which can help if the issue was caused by a hardware glitch.

7. Check For Hardware Damage

If your controller is still vibrating after trying all the software troubleshooting tips, there could be a problem with the hardware.

The most likely culprit is a damaged rumble motor, which can cause the controller to vibrate continuously.

To check for this, open up the controller and take a look at the rumble motor. If it’s damaged, you’ll need to replace it.

You can buy a replacement motor from most electronics stores or online retailers.

8. Delete Any Unused Apps/Files From Your PS4’s Hard Drive

This step is fairly simple. You will need to check your console’s library and see if there is anything you don’t mind uninstalling.

The issue with the vibration might be caused by the lack of free space on your PS4 console.

After you’ve deleted the games you don’t need, restart your console and see if it helped.

9. Factory Reset your PS4 Console

If the problem is with your PS4 console, you might need to reset it. To do this, go to Settings > Initialization > Initialize PS4 > Full > Press Yes to confirm the Initialization.

This will reset all of your settings to their factory defaults, including the controller’s ones.

Before you do this, make sure to back up your data, so you don’t lose any progress in your games.

This is the most radical step, and we recommend you do it as a matter of last resort.

10. When to See a Professional

If you’ve tried all the troubleshooting tips and your controller is still vibrating, there might be a more serious hardware issue that needs to be fixed by a professional.

If this is the case, you can take it to a local electronics store or send it in to Sony for repairs. Or you can simply get a replacement PS4 controller.


If you are experiencing problems with your PlayStation 4 controller vibrating too much, the good news is that there are a few things you can do to try and fix them.

In this article, we have outlined the steps you need to take in order to fix your controller, follow them one by one to achieve the best results.

We hope these tips help get your gaming sessions back up and running as soon as possible!