How To Fix A Hisense TV That Won’t Turn On?(10 Fixes)   

Hisense TVs make for great sources of entertainment. It can be irritating if yours closes and refuses to turn on when you are in the middle of an engaging show or movie. We can help you to fix it.

So, how do you fix a Hisense TV that won’t turn on? Reset your TV.

1. Unplug the TV from the wall.
2. Wait for 60 seconds.
3. Plug it back in.

Or

1. Disconnect all the cables from the TV.
2. Find your TV’s power button. 
3. Hold the power button for 30 seconds.
4. Wait for 20 minutes, turn the TV back on.
5. Turn on the TV using the TV switch, not the remote control.

If your Hisense TV doesn’t turn on, you can fix it if you follow our tips. Read on for the tips and more. Check out the list of the Best Streaming Devices on Amazon now!

What Does It Mean When My Hisense TV Won’t Turn On?

Here are the possible reasons your Hisense TV has refused to turn on:

Power Supply Interrupted

Your TV requires a specific amount of power to turn on. So, suppose the power outlet, strip, power supply adapter, or any other component of your power delivery system is not in its perfect working order. In that case, you’ll most likely experience this issue.

Hardware and Software Issues

Some hardware and software issues can affect the flow of current. They can also interfere with the transmission of electric signals.

Faulty Remote

If the TV has an adequate power supply and is not faulty, you should check whether the remote has malfunctioned or its batteries are worn out.

How Do You Fix a Hisense TV that Won’t Turn On?

To fix your Hisense TV that won’t turn on, you should:

1. Reset Your TV

Some configuration issues may make your TV behave in unexpected ways. If these issues are the culprits, you will likely see the device blink several times without turning on. To fix it, you should remove all configuration files.

1. Unplug the TV from the wall.
2. Wait for 60 seconds.
3. Plug it back in.

If that doesn’t work, try doing the following:

1. Remove the power cable from your TV and all the connected devices.
2. Find your TV’s Power button. It’s located at the bottom or back of your TV.
3. Hold the Power button for close to 30 seconds.
4. Wait for about 20 minutes and then turn the TV back on.
5. Switch on the TV using the TV switch, not the remote control.

2. Plug the TV into a Different Wall Outlet

It could be that the outlet is bad and hinders the free flow of current into the device. Do the following:

1. Plug the TV into different outlets.
2. If it works, call a competent electrician to address the issue or use the working wall outlet.

3. Troubleshoot the Remote

Check whether the red light is lit on the TV’s front. It indicates that the TV is receiving adequate power. If you see the light, the remote could be the culprit.

If there is an object that can block the transmission of signals between the remote and the TV’s receiver, remove it.

Also, remove electronic devices away from the TV, at least temporarily, to eliminate the possibility of external interference. If the issue persists, it’s the right time to troubleshoot the remote. Here is how you should go about this:

1. Discharge the remote. Remove the batteries from the remote. After that, press each of the buttons at least twice and then put the batteries back in.
2. Remove the batteries and replace them with new ones.
3. Replace the old remote with a new Hisense remote.

Tip: On your TV remote, try pressing and holding the Channel Down and Volume up buttons for 10-15 seconds, that might help to turn the TV on.

Related Post: What To Do When Hisense Remote Isn’t Working?(10 Fixes)

4. Unplug All Unused Devices

Sometimes the problem may occur not with your TV or even your Remote, but with the devices, you plug into your TV, like streaming sticks. Make sure you remove all unnecessary devices from the back of your TV.

If you were using any HDMI cable extensions, try plugging your devices directly into the TV or replacing your HDMI extension. You can also try using Different HDMI ports.

5. Check the Power Source

If power is still not reaching the TV, find out whether the power source is functional. You should start by removing the strip or divider if you are using one. If you can’t see the red light in front of the TV, there’s likely an issue with the wall outlet and not these devices.

The simplest solution is to plug the TV into a wall outlet that has proven to work.

6. Check the Backlight and Power Supply Board

Check the backlight if you are using an LCD screen since it uses the backlight to enable you to see images.

1. In order to do this, turn on your TV first.
2. Next, take a bright flashlight and hold it 1 to 2 inches away from your screen.
3. If you can see an image where the flashlight beam hits the screen it means your backlight is broken.

In most cases, unless your TV is new and expensive, there is no point in trying to repair that.

7. Check the Power Adapter and Power Cord

The power adapter is another fragile component of your power delivery system. Since there’s no simple way to tell whether the adapter has malfunctioned or not, you should replace it.

For the power cord, you should:

1. Carefully examine the cord for signs of physical damage or short-circuiting.
2. Borrow a power cord from a friend and check whether it fixes the issue.

If the red light doesn’t turn on, proceed to the next step.

8. Troubleshoot Hardware Issues

You can do the following to determine whether your input slot or a different hardware component is faulty.

Note: Keep an eye on the front panel of the TV where the red light should appear as you troubleshoot. If the light doesn’t appear, hardware issues are most likely the culprit.

1. Plug the power cable into a different wall outlet that you’ve proven to be in the correct working order.
2. Carefully plug the remaining side of the cable into the TV.
3. Start twisting and playing around with the cable gently as you apply mild pressure (plug in and out and use back and forth movements).

9. Hard Reset

If you haven’t fixed the issue at this point or the issue just keeps reoccurring, go for a factory reset. It will remove the installed applications and default settings. To hard reset your TV, follow the guidelines below:

1. Go to the small hole labeled “RESET on your TV.”
2. Bend a paper clip and then insert it inside the hole.
3. Press the clip inside the hole for approximately 15 seconds.
4. Keep holding the clip inside the hole until the TV restarts.

Or, if you can get to the TV’s Settings:

1. Go to Settings > System > Advanced System Settings > Factory Reset.

10. Contact Hisense Customer Support

If all the above steps have failed, you likely have a defective unit. So, you need to contact customer support to get credible information on whether this is the case.

When contacting the support team, provide:

• Your Hisense TV’s model number.
• The remote’s serial number.
• The date you purchased the remote.

With these details, Hisense will be able to check your warranty information and see whether you qualify for a new, free remote.

You can reach Hisense customer support on 800 447 3673. Their hours of operation range from 8.30 am to 7.30 pm AEST, Monday to Friday. On weekends, you should call from 9 am to 5 pm AEST.

Does a Hisense TV Have a Reset Button?

Yes, a Hisense TV has a reset button that you can use to factory reset your device when you’ve tried everything within your means to fix the error without success. As we’ve seen above, you should press it using a paper clip.

Where is the Reset Button On My Hisense TV?

The reset button is hidden inside a hole on your Hisense TV labeled “RESET.” Depending on the model, you’ll find the button at the bottom or back of your TV. You can consult your owner’s manual for the exact position of this feature on your specific model.

Since the reset button is hidden inside the hole, you’ll need a sharp object like a paper clip to access it whenever you intend to factory reset your Hisense TV. Check out the list of the Best Streaming Devices on Amazon now!

Summing Up

Now you know what to do if your Hisense TV refuses to turn on and you are almost feeling irritated. You should check whether the remote is functional, the power supply has been disrupted, or any TV component is faulty, and follow the tips we’ve shared here to fix it.