Hisense designs TVs with your needs in mind. Nonetheless, your Hisense TV can start turning on and off by itself and give you an awful watching experience. To stop this, you can use our simple solutions that you can implement.
How to stop Hisense TV from turning on and off by itself? Power cycle your Hisense TV, restart the TV, check for pending updates, examine the power outlet, and then replace your remote control’s batteries. If the TV still gives you a horrible watching experience, replace the remote, set the auto timer off, and factory reset the TV.
Whether the restarting problem originates from your Hisense smart TV, your connected devices, or firmware, you can fix it. Keep reading for simple ways to do this. Check out the list of the best streaming devices on Amazon now!
Why Does Hisense TV Keep Turning Off And On By Itself?
If your Hisense TV keeps turning off and on by itself, here are the possible causes of that:
System Update Issues
Hisense releases updates after short periods to protect your TV and your content. If you haven’t updated the firmware for a while, it could be the culprit.
Sometimes, update issues increase the prevalence of software errors, which is another common culprit.
Damaged Power Outlet
If your external power outlets are not intact or the connections are loose, your Hisense TV is likely to start turning on and off automatically.
Some unnoticeable physical faults can also have the same impact.
Faulty Remote Control
A physically damaged remote control can emit the wrong signals without your knowledge. Some sensor issues can also interfere with the transmission of signals.
The same can happen if the remote’s power button is faulty or the batteries are weak.
Active Auto TV Timer
Auto timer settings help users control when their Hisense TV should be on and off. If you activate it, you are likely to have the experience.
How to Stop Hisense TV from Turning On and Off By Itself?
To stop your Hisense TV from turning on and off by itself, do this:
Step 1: Power Cycle Your Hisense TV
It would help if you started by power cycling your Hisense TV since this is the most effective way to eliminate software interruptions or power residue.
Once you sweep away cache memory and unnecessary data from your TV, you successfully eliminate many software errors responsible for this problem.
Here are the steps you need to power cycle your TV:
- Turn your Hisense TV off.
- Unplug your Hisense TV cords from the power outlet.
- Press and hold your TV’s power button for about 30 seconds.
- Re-plug the wire into the power slot.
- Power on the television.
At this point, your Hisense TV can reload and automatically fix the turning-on-and-off-by-itself issue.
While your TV is unplugged, we suggest you also inspect all the cables connected to the TV. Unplug them, inspect them for any dust and dirt, and then reconnect them.
Step 2: Restart Your TV
If step one fails, restart the TV to remove any other glitch that might still be causing you the pain. You can do this:
- Long press the manual Power button.
- From the options that appear, click Restart.
- Wait for the TV lights to turn up.
On top of that, make sure to unplug any unused devices including USB sticks and HDMI cables.
Step 3: Check For Pending Updates
You can perform a safe external update since the other options might not serve you well. To do this, reach out to Hisense TV support for the latest version of the firmware.
Here are the steps you need to install the necessary files:
- Plugin the USB containing your firmware into the TV’s HDMI port.
- Wait for a short while for the process to start automatically.
- Follow the on-screen instructions and wait until the system reboots.
If you were a victim of software-related problems, this method should fix this issue successfully.
Step 4: Check Power Outlet
Check noticeable damages on the outlet by doing this:
- Check all external power outlets.
- Confirm whether the outlets are intact.
- If you notice loose connections, plug them firmly.
You can always try plugging your Hisense TV into a different outlet or a power strip to see if it fixes the issue.
Step 5: Replace Your Remote Control
As already mentioned, a faulty remote or remote button can interfere with the transmission of signals and lead to this problem. Troubleshoot and fix this by following the steps below:
- Replace your remote’s batteries.
- Hold your remote away from your TV if that doesn’t fix the issue.
- Replace the remote control and test whether you’ve fixed the problem.
Once you are on the right channel, the thing you can try is to take the batteries out of your remote altogether and see if your TV stays on.
Step 6: Set the Auto Timer Off
You can set the auto-timer off by doing this:
- Press Quick menu.
- Scroll to Settings and then press OK.
- Scroll to System and then press OK.
- Go to Timer Settings and then press OK.
- Scroll to Sleep Timer and then OK.
- Select Off.
- Once you’ve adjusted the Sleep Timer, press EXIT.
While you are in the settings, make sure you are on the right source. If possible, try changing the source on the TV to see if it will help keep the TV on.
Step 7: Factory Reset Your Hisense TV
Here is what you need to do to factory reset your Hisense TV:
- Press your TV’s Power button.
- On the remote, press the Settings button.
- Navigate to About TV.
- Press OK on the remote.
- Choose the Restore To Factory Default.
- Press the OK button.
- Choose Reset/Yes/OK and press the OK button.
If your TV is acting out too frequent for you to do this step, here is how you can reset your Hisense TV without the remote:
- At the back/bottom of your TV, there is a reset hole labeled Reset.
- Use a paper clip to insert into the hole.
- Push the clip inside the hole and press it for about 10 seconds.
- Hold it down until your Hisense TV restarts.
Logo on Hisense TV Comes On Then It Turns Off, How To Fix It?
Here are what you should do to fix the logo on your Hisense TV that comes and then turns off:
Fix Power Supply Issues
It would serve your needs well if you did this:
- Power on the TV.
- Pull out your TV’s power cable from the power socket as soon as the logo appears (Don’t press the manual Power button on the remote or TV.
- Plug the TV cord wire back.
Power Cycle Your Hisense TV
- Use the tips we’ve discussed above to power cycle your Hisense TV.
Update Your Hisense TV Firmware
Since you might not be able to make adjustments on your Hisense TV’s settings, do this:
- Contact the support center for a USB containing the latest firmware version.
- Once you receive it, follow the provided instructions to update the firmware.
Check Your Backlight
Place the TV in a dark room and use a spotlight to see whether the TV is displaying images. If you can see pictures, replace the backlight.
Check Your T-Con Board
This board controls the signals of your TV picture. You should seek an expert to troubleshoot and fix it.
Sometimes, the expert might find out that your mainboard malfunctioned and affected the effectiveness of the display controls.
Related Posts:
How To Stop Hisense TV From Turning Off By Itself?(8 Ways)
How To Easily Stop Hisense TV From Turning On By Itself?
Stopping Your Hisense TV from Turning On and Off By Itself
To sum up, the quickest thing you can do to fix the issue is to power cycle your TV. If that didn’t work, plug your TV into a different wall outlet. Change the batteries in your remote and see if it makes a difference.
Unplug any unused devices including USB sticks and HDMI cables. As a matter of last resort, factory reset your TV. That should definitely help.
We’ve discussed in detail how to troubleshoot and fix your Hisense TV that’s turning on and off. Moreover, we’ve seen ways to fix the Hisense TV logo that comes on and then turns off.
Now you have everything you require to stop your Hisense TV from giving you an awful watching experience.
Hi there, technology lovers! My name is James, I am an admin and a frequent writer for this blog. I am a techno-geek, so this blog is the place where I want to share all my knowledge with you to make your life a little bit easier in terms of dealing with technology.
