10 Easy Ways To Fix Your Onn Roku TV Remote

Onn Roku TVs provide amazing value for money. However, their remotes may cause problems at times.

Most of the time your Onn Roku TV remote isn’t working properly because of the minor software glitches both in the TV and the remote. To fix that, you will need to power cycle your TV and reset your Roku remote. On top of that, put fresh batteries in your remote and press all the buttons on it to make sure no button got stuck.

In this guide, we’ll help you fix your Onn Roku TV remote get it working again. Check out the list of the best Onn Roku TV remotes on Amazon now!

Why is the Onn Roku TV Remote Not Working?

There are a number of reasons your Onn Roku TV remote is not working. It could be something simple like depleted batteries or something more complex like some problem with the Roku TV settings.

No matter what the problem, our troubleshooting steps ahead should help get it up and running as soon as possible.

How to Fix Onn Roku TV Remote?

Here are the best tips that will help you fix your remote in no time.

1. Check Your Remote Batteries

Make sure that your remote’s batteries haven’t run out. A gradually degrading performance is a very strong indicator that the battery’s power supply has slowly been dwindling.

Even if you have a fresh set of batteries in the remote, we suggest you do the following:

  1. Turn your TV off.
  2. Take the batteries out of the remote.
  3. Press and hold the remote’s power button for 30 seconds.
  4. Put new batteries in.

Check if that has fixed the issue. This will drain all the residual energy from the remote and make it work much better.

Here is a checklist of everything that can be done to make sure your Onn TV remote works properly.

  1. Ensure your remote batteries are fully charged and properly fixed.
  2. Press all the buttons on the remote a few times to make sure one of them is not stuck.
  3. Give your remote a good shake to get rid of any dust and dirt or disconnected cables.
  4. Ensure no physical objects are obstructing or interfering with the signals from the remote.

2. Soft Reset Your Onn TV

We told you what you can do to fix the remote, but it takes two to tango. So, if you only reboot your TV occasionally, here is the most effective thing you can try to get your Onn TV remote connecting again:

  1. Unplug the power cable from the power outlet.
  2. Wait for at least 60 seconds.
  3. Hold down the TV’s power button for at least 60 seconds.
  4. Plug the TV back in.

3. Reset Your Roku Remote

Roku remotes can be reset by performing a specific sequence during the Roku device’s boot process.

To reset a Roku remote:

  • Remove the batteries from the Roku remote.
  • Disconnect the Roku TV from its power supply.
  • Wait for 10 seconds and then reconnect your Roku TV to its power source.
  • Wait for the Home screen to load.
  • Reinsert the batteries into your Roku remote.
  • Press and hold the Reset button located in the battery compartment for about 5 seconds.

If your Onn Roku TV remote still does not work, move on to our next tip.

4. Check Your Wi-Fi Connection

If you have gone through the above Roku remote troubleshooting tips but still have not had any success, your local Wi-Fi network could be the culprit.

The Roku remote does not require an active internet connection in order to connect to your TV, but it does need a functioning wireless local network. If your WiFi is down for any reason, the remote will not be able to function until the network is restored.

If you have the technical knowledge, it is worth digging into your router’s settings to see if something is causing the remote’s connection to the network to get blocked.

Here is a simple way to troubleshoot your WiFi connection:

  • Unplug the router from the power source.
  • Wait for 1 minute.
  • Plug it back in.
  • Wait for the router to establish the connection.

5. Check the Remote’s Pairing

Some special remotes for Roku TV are “point anywhere” remotes. This means they do not need to be pointed towards the TV to work. Instead of infrared they use your local WiFi to control the TV.

For such remotes, a common cause for it not working is that the remote has become unpaired from the Roku device it is supposed to control.

You can check if you have a “point anywhere” remote by removing the battery cover from the back. If you find a button in the battery compartment, that’s the pairing button you need to use to pair the remote and Roku TV.

A system update, low power, changing your WiFi network, or using the device with another Roku device could all theoretically cause an unexpected unpairing.

Fortunately, the pairing process is not that long. Just follow the instructions ahead.

  1. Disconnect your Roku TV from its power supply.
  2. Wait 10 seconds before reconnecting it and wait for the Home page to load.
  3. Hold the pairing button on your remote for 5 seconds or until you see the light on your Roku remote blinking.

Keep in mind that some older Roku models come with an IR remote instead of using your Wi-Fi connection.

6. Check for Blocked Infrared Light

Simple Onn Roku TV remotes utilize infrared light to send commands to your TV. IR remotes need a clear, unobstructed transmission from the remote to the Roku device.

Your Onn Roku TV remote will not be able to work if there are objects, walls, or any other barriers in between the remote and device. If you can’t move around the blockage, you should raise the remote higher to send a clear signal to your TV.

7. You Can Use the Official Roku Remote App

Using your smartphone as a permanent Roku remote may not be ideal, however, there is an official Roku app for both Android and iOS that you can download and use for free. It’s a reliable temporary or permanent solution until you get a replacement remote.

Before you open the app on your smartphone for the first time, ensure that your smartphone is connected to the same WiFi as your Roku TV.

You will see the Discovery screen as soon as the app loads. Allow the search process a few seconds to complete, and you should see your Roku TV listed. Tap on the TV to connect your phone and TV.

Along with the ability to be used as an Onn Roku TV remote, the Roku app has lots of other cool features worth looking at as well.

These include access to free movies and TV shows on your device via The Roku Channel, being able to use your smartphone’s headphone jack for private listening, support for a keyboard (and voice input), and a smooth way to cast content from your smartphone to the TV.

Visit your device’s app store to download the Roku – Official Remote Control app now.

8. Troubleshooting the Roku App

If you download the app and are not able to see your Roku TV, there are a couple of things to check:

  • Network Access: Make sure your Roku TV has active network access. Visit Settings > System > Advanced System Settings > Control By Mobile Apps > Network Access to check and ensure either the Permissive or Default option is selected.
  • VPN: The Roku remote app will not work if your phone or your Roku TV are connected to a VPN.

If your Roku app is still not working after checking these things, you will need to buy and wait for a new remote.

9. Factory Reset Onn TV

If nothing works, the final thing you can try is to factory reset your TV and then reconnect your Roku remote to it. We will give you 2 reset options depending on which one will be more convenient.

Factory reset Onn TV through the Settings:

  1. Press Home on your remote.
  2. Go to Settings.
  3. Scroll all the way down to System.
  4. Select Advanced System Settings.
  5. Select Factory Reset.
  6. Click Factory reset everything.
  7. Enter the access code and press OK.

Factory reset Onn TV through the physical reset button:

    1. Turn the TV on.
    2. Locate the Reset button at the side/back of your TV.
    3. Take a pen/paperclip, press and hold the Reset button for about 20 seconds.
    4. Wait for the TV to reboot and the logo to more ap.

how to reset ONN TV

After the factory reset is complete, pair your remote to the TV, it should start working. We mentioned all the steps you need to do to pair your remote in the previous steps.

10. Replace the Remote 

There are a variety of remotes available for you Roku. You can purchase a remote directly from Roku by visiting https://www.roku.com/products/accessories. Alternatively, you can visit Amazon and buy any remote that is compatible with Onn Roku TVs.

Check out the list of the best Onn Roku TV remotes on Amazon now!

Onn Roku TV Remote not Working no Pairing Button

This issue is more specific, yet many people experience it. Here are a few things you can do to reset your Roku remote when there is no pairing button on it:

  1. Turn your TV off.
  2. Take the batteries out of the remote.
  3. Press and hold the remote’s power button for 30 seconds.
  4. Put new batteries in.

If that didn’t work, you can install the Roku remote app on your smartphone and try to pair your remote to your TV through the setting menu.

Alternatively, you can apply other tips listed in this article to fix the remote without the pairing button.


We hope the steps we have discussed in this article have managed to fix your Onn Roku TV remote. Unfortunately, in some cases, there is no solution but to purchase a new remote.

This is particularly the case if your remote has been hit somewhere or fallen to the floor.