Facing technical issues at some point in a TV’s life is inevitable, and Samsung’s TVs are no exception. So, what to do when your Samsung TV doesn’t turn on?
What to do when your Samsung TV won’t turn on? Reset your remote. Remove the batteries>Press and hold the power button on the remote for 15 seconds>Put the batteries back in. If that doesn’t work, power reset your TV. Unplug it from the wall outlet, wait for 1 minute, plug it back in. Disconnect all the cables, inspect them for any damage or dust, plug them back in.
The first step is to check the status of the LED indicator on your TV. Read the rest of this article to find out more about why your Tv will not turn on and what you can do about it. Check out the list of the best streaming devices on Amazon now!
Why Won’t My Samsung TV Turn On?
Several components can fail in a Samsung TV that may cause it not to turn on. The LED light on the TV can act as a good indicator of where the problem may lie.
If the indicator does not come on, you might have a faulty power supply. If the light does turn on, there could be an issue with your remote or TV buttons. In case the light blinks, you could have a faulty component inside the TV.
What to Do When Samsung TV Won’t Turn On?
Check your Remote
If the standby light on your TV lights up normally, but the TV does not turn on, you might have a faulty remote. Try turning on your TV using its physical power buttons. Depending on its model, this may be on the side, back, or bottom of your TV.
If your TV successfully turns on, your remote is faulty.
- You need to reset your remote control by removing the batteries.
- Then proceed to press and hold the power button for about 10-15 seconds.
- After this, you can put the batteries back in and try to turn on your TV using the remote.
If it’s still not working, try replacing the batteries in it or try using a different remote for your TV.
Related Post: 10 Best Ways To Fix Samsung Smart TV Remote Not Working Issue
Your TV Might be On
Setting the TV on a blank source (such as an HDMI source that isn’t functioning correctly) can result in no image being shown.
In case your standby light comes on and disappears when you turn on the TV using a remote or the TV’s power button, it might be possible that your TV does turn on but because of being set on an absent source, resulting in you seeing nothing on the screen.
Try opening the menu or changing the display source to see if something pops up on the screen.
Reseat all Connections
In case your TV standby light does not come on at all, it is quite likely your TV is not receiving any power. Faulty connections can result in your TV not receiving any power or video input.
Disconnect, inspect, and reconnect all the wiring connected to your TV to ensure your problem is not the result of a loose connection.
Check your Power Supply
Disconnect your TV from its power supply and check the power socket using a free charger or lamp. If your device does not work, you have a faulty power socket. Simply connect your TV to another socket to use it or get your socket repaired if needed.
In case you use a power surge protector, try connecting your TV directly to a power socket to rule out the surge protector being faulty.
Perform a Power Reset
TVs are complex devices with thousands of tiny components. Often a component can get incorrectly charged, leaving the TV unusable. A power cycle can reset the set of configuration parameters for all the components and help you solve this problem.
- To carry out a power cycle turn off your TV and disconnect it from any connected devices and its power supply.
- Press and hold the TV remote’s power button for full 60 seconds.
- Leave the device as it is for a few minutes before plugging your TV back again and switching it on.
Perform a Factory Reset
This step will only work provided you managed to get your TV working in the end but the problem still keeps reoccurring. The thing you will need to do is to factory reset your Samsung TV so it won’t have issues turning on.
- Go to your Samsung TV’s Settings.
- Choose Support.
- Self Diagnosis.
- Select Reset.
Hopefully, this will fix the issue once and for all.
Related Post: Fix Black Screen On Your Samsung Smart TV(15 Solutions)
How Do I Force My Samsung TV to Start?
A blinking indicator light on your Samsung TV means your TV has a power supply but can not turn on due to some other problem. This can happen due to an inappropriate or low supply voltage, faulty power board, or fried motherboard.
If your area often experiences electricity voltage issues or you’re experiencing problems with other devices in your house as well, turn off your appliances to avoid damage to their electrical components and use them once things stabilize.
However, if there are no issues with anything else at your location, you might have a faulty component in your TV that needs to be repaired or replaced. There is no method to force your TV to turn on in such a case.
A failed component, or faulty power supply, cannot be resolved without getting the necessary repairs. It would therefore be best to contact Samsung for further assistance or get a technician to have a look at your TV. Check out the list of the best streaming devices on Amazon now!
How Can I Reset My Samsung TV If It Won’t Turn On?
Unfortunately, a TV that will not turn on can not reset its software. However, a power reset can be performed and may be able to solve the problem.
- Disconnect your Samsung TV from any connected devices and its power supply.
- Hold the power button on your TV remote for full 60 seconds.
- Leave the device as it is for a few minutes.
- Plug in your TV again and switch it on.
Conclusion
Hopefully, our detailed guide has helped you fix your Samsung TV not starting. If not, there is most likely a more technical problem with your TV, and you will need to get the assistance of Samsung’s customer care or a local technician to solve your problem. Otherwise, these solutions are likely to help you out!
Hi there, technology lovers! My name is James, I am an admin and a frequent writer for this blog. I am a techno-geek, so this blog is the place where I want to share all my knowledge with you to make your life a little bit easier in terms of dealing with technology.