Amazon Fire Stick allows you to quickly access your favorite multimedia platforms by plugging it into your TV’s HDMI port. In rare cases, it can start rebooting when you’re enjoying your favorite content.
How to fix Amazon Fire Stick keeps restarting? Use official Fire Stick accessories, replace your USB cable, use an efficient power adapter, plug your Fire Stick directly in your power outlet, and then remove your USB extension cables. If the issue persists, disconnect other HDMI-connected devices, turn off HDMI CEC, restart the Fire Stick, replace the remote’s batteries, clear the cache of the installed apps or remove the apps, and then update the device. As a matter of last resort, reset the streaming device to factory default.
If you still think you can’t fix Amazon Fire Stick keeps restarting quickly, please read on. You’ll find simple, tried-and-tested ways to fix it fast. Check out FireStick’s original Power Cords and Power Adapters on Amazon now!
Do Fire Stick Reset/Factory Reset Themselves?
Yes, your Fire Stick can soft reset itself. For example, if you have too many apps installed, it can keep restarting to attempt to fix the issue. However, it’s almost impossible for the device to factory reset itself. So, it would be best if you considered anything other than this an abnormality.
Why Did My Fire Stick Reset Itself?
There are several reasons your Fire Stick could be resetting or restarting itself. Here are some of the most common ones:
Plugged Substandard Accessories
If you misplaced the original accessories or are lazy to connect them, you may choose to use an alternative adapter or USB cable for your Fire TV. All of us can be guilty of this. Unfortunately, Fire Stick hardly works with many of these substitutes. So, if your Fire Stick keeps restarting from the blue, it could be the main culprit.
Faulty USB Cable
Sometimes, we choose to use micro USB cables for economic and other reasons. Regrettably, they’re unreliable and can stop transmitting the required signals at any time. So, unless you are using brand new micro USB cables, you might not have the best entertainment experience.
Power Adapter-Related Issues
Fire Stick TVs come with 1 Amp adapters. The device could start restarting if you have replaced the adapter with one that’s less efficient.
If the adapter is in the best working condition, you could be using your TV’s USB port. It supplies inadequate power. You could have the same issue if you are using extensions, like USB and power extensions.
Interference from Other HDMI Connected Devices
Most modern TVs feature two or more HDMI ports. This allows us to hook multiple devices to them. Some of the hooked devices interfere with the transmission of Fire Stick signals and can cause this same problem.
Software glitches are prevalent in the present tech world. If your Fire Stick is outdated, your chances of experiencing troubles like automatic Fire Stick reboots will increase. Some causes of these issues are unknown. However, for your Amazon Fire Stick to work as required, you must eliminate the harmful software errors.
HDMI CEC Interference
Most modern TVs come with the HDMI feature. It’s designed to help you control your Fire Stick and other plugged devices. In some cases, this feature can interfere with your Fire Stick’s performance without any apparent reason.
Low batteries in your Fire Stick’s remote can mislead the device to send a restart signal at the wrong time and give you a bad experience.
Too Many Installed Apps
We mentioned in the beginning that your Fire Stick could keep restarting if you’ve installed too many apps. The apps and performance facilitators work in the background and can eat up the device’s memory. Due to this, your Fire Stick can keep rebooting in an attempt to fix the error.
In some cases, your Fire Stick can keep restarting since the cache of the apps is full. The cache is a library of stored files and data. It should always have adequate space to store some vital pieces of information. If your app’s cache is full, the Fire Stick won’t function as required. It can start behaving as if you’ve installed too many apps.
Perhaps, hardware issues are the most complicated problems to resolve. If you suspect that your devices’ motherboards are faulty, you should seek the help of a certified expert.
Related Post: 14 Solutions To Fire Stick Optimizing System Storage And Applications Loop. We have an article on a similar topic here, some of the solutions can be applied for the issue we discuss here, so go check it out!
How to Fix Amazon Fire Stick Keeps Restarting?
You can fix Fire Stick keeps restarting without any difficulty if hardware issues are not the underlying cause of the problem. In other words, in most cases, you won’t require an expert to fix this issue.
If you want to fix your Fire Stick keeps restarting problem quickly without spending a coin, you should follow these simple steps:
1. Use Official Fire Stick Accessories
Since your Fire Stick requires the right amount of power, you should unplug the off-brand USB cable or power block you are using to power it. After that, use the ones that came with the device.
2. Plugging In/Out
We know that this way is kind of obvious. Nevertheless, this is by far the quickest and easiest way to fix your device. If it works, you are lucky, if no, please, continue reading, we have other tricks for you to try.
- Unplug your Fire Stick from the HDMI port and remove the USB cable
- Turn the TV off, unplug it from the wall
- Wait for about 5 minutes
- Plug everything back in
- Follow the usual optimization process
3. Replace Your USB Cable
If you are still using your old Micro USB cable to power your Fire Stick, it’s time you replace it with a brand new one. These cables are highly efficient but not long-lasting.
4. Try A Different HDMI Port
The faulty HDMI port can possibly be an issue in this situation, so the next step in fixing your Fire Stick optimization loop should definitely be the following:
- Remove the Fire Stick from the HDMI port you are using
- Try to use a different HDMI port on your TV
- Make sure you have the Fire Stick plugged into a wall outlet(not a power strip)
5. Use a 2 Amp Power Adapter
Replace your old 1 Amp adapter with one with a similar or slightly higher power supply. If your Amazon Fire TV requires more power, go for a 2 Amp power adapter.
6. Plug Your Fire Stick Directly in the Power Outlet
If you’re like many Fire Stick users, you’ve plugged your streaming device’s power cable into your TV’S USB port. If not, you’ve plugged it into the power block that powers your phone. If either of these is the case, you should now plug it directly into your power outlet.
7. Remove USB Extension Cables
You may be using an extension cord that provides inadequate amounts of power. To troubleshoot and fix this issue, all you need to do is to remove the extension.
8. Disconnect Other HDMI Connected Devices
To find out whether another HDMI device is interfering with your Fire Stick’s streaming signals and fix the issue, you can do this:
- Unplug all the other HDMI devices.
- If this fixes the issue, plug the devices back in one by one.
- After identifying the HDMI device that causes the problem, remove it permanently.
If possible, you should also replace your Fire Stick HDMI cable.
9. Turn off HDMI CEC Device Control
To disable HDMI CEC, you should go to the menu and follow the specific steps below.
- Go to Settings.
- Choose Display & Sounds.
- Select “HDMI CEC Device Control.”
- Ensure the HDMI CEC is “off.”
- That’s all. Test whether you’ve fixed the issue.
10. Reboot Your TV
We spend quite a lot of time blaming the Fire Stick, but let’s try to do something different here and have a look at your actual TV as a potential problem. The process differs depending on your TV model, but here is a general guideline:
- Press and continue holding the power button on your remote control for about 5 seconds until the TV restarts
- If the problem persists, unplug the TV from the wall altogether. Then press the power button on the TV, and release it
- Wait for 2 minutes, plug the TV’s power cord back in
11. Use your Fire TV Remote to Restart the Device
You can manually soft reset your Fire Stick to remove the temporary errors causing the issue. One way to restart the device is to unplug the power cord from it. Using the remote is much easier and can give you better results. Here is how you can use it to soft reset your Fire Stick:
- Long press the Play and Select buttons simultaneously.
- Follow the on-screen instructions to complete the reset.
If the soft reset option fails to work, you should hard reset the device. To do so, you should do this:
- Long press the Select, the Right, Back, and Reverse buttons at the same time.
- Follow the on-screen instructions to complete the hard reset.
12. Replace Your Fire TV Remote Batteries
This is simple. You remove the old batteries and replace them with fresh, brand new batteries. If that doesn’t help, you should proceed to the next step.
13. Press The Remote Buttons
Sometimes a random tiny button on your remote control can get stuck, which might prevent your TV and Fire Stick from functioning normally. Switch your TV off, and go nuts on pressing each and every button on your remote for a few minutes, then switch the TV back on, see if it helped.
14. Clear Cache of the Installed Apps/ Remove the Apps
To clear the cache of your installed apps, you should do this:
- Go to Settings.
- Select Applications.
- Choose Manage Installed Applications.
- Select your targeted app.
- Choose Clear Cache.
Remember, you should target as many apps as possible to maximize your chances of success. If you have too many apps, you can remove some of them by following the same steps discussed here. However, instead of clicking ‘Clear Cache,’ you should click ‘Uninstall.’ Repeat the same process until you delete all the unwanted apps.
15. Update Your Fire Stick
To fix software bugs, you should update your Fire Stick. Here’s how you can do this:
- Go to Settings.
- Choose My Fire TV.
- Select About.
- Hit Check for a System update.
16. Factory Reset Your Fire Stick
If you’ve updated your Fire Stick, but the problem persists, you should reset it to factory defaults. You’ll lose all your custom settings and installed apps. So you should remember to back them up if necessary. We said in the beginning that Fire Sticks don’t typically factory reset on their own. So, you need to do it fix this type of problem.
Here are the steps you need to follow to reset your Fire Stick:
- Go to Settings.
- Select Reset to Factory Defaults.
- Wait for this message, “Resetting your Amazon Fire TV Stick 4K to Factory Defaults, “to go away.
Now you know what you should do if your Amazon Fire Stick keeps restarting. You should follow the above steps to troubleshoot and fix the issue quickly at no cost. If nothing seems to work, you should contact Amazon to replace or repair it since you could be a victim of hardware issues. After doing that, you’ll start accessing your favorite multimedia platforms again.
Hi there, technology lovers! My name is James, I am an admin and a frequent writer for this blog. I am a techno-geek, so this blog is the place where I want to share all my knowledge with you to make your life a little bit easier in terms of dealing with technology.