Fire Stick Won’t Turn On(17 Proven Solutions)

Fire Stick allows you to enjoy quality online games and apps and shows from your TV screen. If the device refuses to turn on, you won’t access your favorite content until you fix the issue.

What to do when Fire Stick won’t turn on? Check that all the cables are properly inserted and the TV source is correct, get a new original adapter/charging cable, fix your charging port. Restart your Fire Stick by disconnecting it from the wall, then wait for 1 minute, plug it back in. Power reset your TV:

• Keep your TV on and then unplug it from the wall.
• Hold the power button on your remote for 30 seconds.
• Plug your TV back in and turn it back on.
• Go to the Fire Stick input channel, it should be working now.

If you are not tech-savvy, you need more guidance to fix it. We provide these details below. Check out the list of the Best Streaming Devices on Amazon now!

Why is Fire Stick Not Turning On?

To fix your Fire Stick, you should troubleshoot the potential causes of the problem.

• Remote inefficiency. One of the most prevalent ones is Fire Stick remote inefficiency. If your remote is faulty, it won’t transmit the signals as required when you turn the device on. At the same time, the remote won’t pair if the battery has been drained or attached wrongly.
• Loose cables. Loose attachment between the device and the HDMI port and poor power cable connection can also hinder your Fire Stick from turning on.

Other potential culprits that you should watch out for are:

• Weak internet connection and issues associated with the router and modem.
• Low-quality adapters and other connectors such as HDMI cable.
• Software bugs.
• Faulty hardware components.
• Faulty charging port.
• Compatibility issues.
• Major power problems.
• Audio issues.

What to Do When Fire Stick Won’t Turn On?

Now that you know the possible reasons your Fire Stick won’t turn on, you are much better equipped to fix the issue independently than before. Here are the steps that you should follow to solve the connecting problem and start enjoying your favorite content again:

1. Power Reset your TV

Let’s get you started with the easiest and most effective technique when it comes to troubleshooting your Fire Stick. Follow these simple steps below:

• Keep your TV on and then unplug it from the wall.
• Hold the power button on your remote for 30 seconds.
• Plug your TV back in and turn it back on.
• Go to the Fire Stick input channel, it should be working now.

2. Plugging In/Out

We know that this way is kind of obvious. Nevertheless, this is by far the quickest and easiest way to fix your Fire Stick not turning on issue. If it works, you are lucky, if not, please, continue reading, we have other tricks for you to try.

• Unplug your Fire Stick from the HDMI port and remove the USB cable.
• Turn the TV off, unplug it from the wall.
• Wait for about 5 minutes.
• Plug everything back in.
• Follow the usual optimization process.

3. Restart your Fire Stick

This is also one of the best ways to fix temporal system errors and configuration problems. There are 2 ways to restart the device in our situation. These are:

• Disconnect the Fire Stick power cord from the power outlet or the device’s back. Plug it back in after 60 seconds.
• Long press the Select and Play/Pause buttons concurrently for at least 5 seconds.

4. Check the Cables

In this step, you will need to inspect all the cables connected to your device and make sure they are properly plugged in, not damaged or dirty. You can unplug the power cord, hold the power button on your remote for 30 seconds, then plug the cable back in.

Also, make sure you check the following things as well:

• Ensure the HDMI port is inserted firmly and properly.
• If step one fails, replace the power adapter and USB cord.
• Ensure you are using a well-charged remote from Amazon.
• Disconnect the HDMI Hub and plug the device directly into your TV or the tablet.
• Be sure the HDMI port is connected to the right input on your TV channel.
• Ensure you are using high-speed cables to make the connections.

Tip: Unplugging and reinserting the cables into your device might help to fix the issue. You can soft reset your TV before plugging them back in. Simply unplug your TV from the wall, wait for 1 minute, plug it back in.

5. Fix the Power Port

In this step, you will need to inspect the power port on your Fire Stick. There is a metal plate around the port and a black charging element inside. If this element is touching the metal plate, your device won’t charge properly.

All you need to do is to take a pin or a kitchen knife and very gently move that black element up so it doesn’t touch the metal plate. That should help a lot with the not turning on issue.

6. Choose the Right Source

Look at the back of your TV and take notice of what HDMI port it is connected to. Then on your TV remote, press the “Source/Input” button and make sure that your Fire Stick and your TV are on the same input.

7. Get The OEM (Original Equipment Manufacturer) Power Cord

It is possible that you are using an old or simply not very good cable to power up your Fire Stick. By simply changing your power cord to an Amazon original one, you can quickly fix the Fire Stick not opening issue.

8. Use Amazon Original Adapter

The same applies to the adapter. If you have already changed your cord to the OEM one and the issue persists, try changing your power adapter as well.

I find that just changing the adapter to a different one, not necessarily the Amazon one, can do the trick. But if that does not work, try getting the original Amazon adapter.

Tip: Don’t use the USB port on the TV, always use the Power Adapter to connect your Fire Stick. Check for loose cords and push them properly in.

9. Change the Resolution

Another potential culprit could be the resolution the TV is set to. On your remote, press the “UP” and “REWIND” buttons at the same time for 5 seconds to cycle through the different resolutions.

10. Test on Other Devices

Try to use your Fire Stick with another device, this won’t necessarily fix the issue but rather will give you an idea of where the problem actually occurred. If your Fire Stick works on a different device, follow the next step below.

 

11. Try A Different HDMI Port

The faulty HDMI port can possibly be an issue in this situation, so the next step in fixing your Fire Stick not turning on should definitely be the following:

• Remove the Fire Stick from the HDMI port you are using.
• Try to use a different HDMI port on your TV.
• Make sure you have the Fire Stick plugged into a wall outlet(not a power strip).

12. Verify Remote Not Pairing

If you’ve used the remote batteries for about six months, they might be out of charge. Replace them with your spare alkaline battery and see whether that solves the issue. Always keep one spare quality battery.

If the remote is fully charged, you should do the following:

1. Unplug the power cord from your device or wall outlet for several seconds (This helps fix configuration issues in the remote).
2. Plug the device back in.
3. Press the Home button for approximately 8-to-10 seconds (That will help pair the remote again).

If the remote remains unresponsive, check faulty buttons. You can seek the help of a Fire Stick specialist who can diagnose the extent of damage and replace the buttons if necessary. You can also check your remote’s compatibility if the buttons are in the ideal working order.

13. Test your Internet Speed

If there are no issues with your remote, test whether your modem or router is working as required.

Here are the simplest steps that you should follow to fix the issue:

1. Turn off the wireless function.
2. Restart the modem and router.
3. If the problem persists, get in touch with the internet service provider (ISP).

14. Avoid Power Strip

Insufficient power can be a culprit as well. If your power strip is overcrowded by multiple different devices, it makes sense to try and connect your adapter straight to the wall to get more power, so your device has enough power running through. That should definitely work combined with the previous steps.

15. Test the Device with the Network Usage Tool(If Applicable)

The Network Usage Tool is designed to help you detect advanced network issues that could be hindering your Fire Stick from turning on. To get this tool, you should do this:

1. Go to Settings.
2. Select Network from the TV menu.
3. On your TV remote, press the Play or Pause button.

If the tool tells you that your system is free from errors, you should go to the next step to fix the issue.

16. Reset the Fire TV Device to Factory Settings(If Applicable)

If serious errors and configuration issues are responsible for the issue, you should factory reset it. Here are the steps you should follow if you can get access to the Settings:

1. On your Fire TV, go to Settings(hold down the Home key on the remote or go to the home screen’s top to find this).
2. Select My Fire TV(If you have an older Fire Stick, you see it labeled Device or System).
3. Select Reset to Factory Defaults(when asked for your PIN, enter it).
4. Click Reset.

After your Fire Stick resets, it will automatically restart as if you were setting it up for the first time. Other than that. It will automatically optimize system storage and apps.

If the trouble persists after this step, you could be a victim of motherboard issues.

17. Seek Professional Help

Unless you are a technician who has the manufacturer’s permission, you shouldn’t attempt to repair the Fire Stick. Call an accredited expert to repair it. If the device still enjoys warranty protection, ask your service provider to replace it. Check out the list of the Best Streaming Devices on Amazon now!

Summing Up

As you can see, you can fix your Fire Stick that has refused to turn on and continue enjoying quality online games and apps, and TV shows. Sometimes, all you need to do is unplug and then plug the device back in.

At other times, you have to factory reset the device or seek the help of an expert technician. If you consider the entertainment value you get, the effort is always worth it.